CJME2025年3期目錄

Intelligent Maintenance and Health Management

Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model

基于U-Net改進模型的印制電路板微孔孔壁粗糙度定量檢測方法研究

作者：

Lijuan Zheng, Yonghao Li, Zhuangzhuang Sun, Yangquan Luo, Ying Xu, Jun Wang, Chengyong Wang and Xin Wei

引用：

Zheng, L., Li, Y., Sun, Z. et al. Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model. Chin. J. Mech. Eng. 38, 76 (2025). https://doi.org/10.1186/s10033-025-01245-3

Fault Detection and Fault-tolerant Control based on Bi-LSTM Network and SPRT for Aircraft Braking System

基于雙向長短期記憶網絡與序貫概率比檢驗的飛機剎車系統故障檢測與容錯控制

作者：

Renjie Li, Yaoxing Shang, Jinglin Cai, Xiaochao Liu, Lingdong Geng, Pengyuan Qi and Zongxia Jiao

引用：

Li, R., Shang, Y., Cai, J. et al. Fault Detection and Fault-Tolerant Control Based on Bi-LSTM Network and SPRT for Aircraft Braking System. Chin. J. Mech. Eng.38, 64 (2025). https://doi.org/10.1186/s10033-025-01219-5

Machining Manufacturing

Geometric Accuracy Design of High Performance CNC Machine Tools: Modeling, Analysis, and Optimization

高性能數控機床的幾何精度設計：建模、分析與優化

作者：

Liping Wang, Jihui Han, Zihan Tang, Yun Zhang, Dong Wang & Xuekun Li

引用：

Wang, L., Han, J., Tang, Z. et al. Geometric Accuracy Design of High Performance CNC Machine Tools: Modeling, Analysis, and Optimization. Chin. J. Mech. Eng. 38, 87 (2025). https://doi.org/10.1186/s10033-025-01258-y

Measurement and characterization of micro corner-cube reflectors array using coherent denoising interference and physical model-based neural network

基于光學傳遞函數的微結構干涉測量相干去噪與輪廓重建

作者：

Xinlan Tang, Lingbao Kong, Zhenzhen Ding, Yuhan Wang, Bo Wang, Huixin Song & Yanwen Shen

引用：

Tang, X., Kong, L., Ding, Z. et al. Measurement and Characterization of Micro Corner-Cube Reflectors Array Using Coherent Denoising Interference and Physical Model-Based Neural Network. Chin. J. Mech. Eng. 38, 93 (2025). https://doi.org/10.1186/s10033-025-01260-4

Material Deformation and Damage Mechanism Based on In-Situ Plasma-Assisted Nanoscratch Test of Single Crystal Silicon

基于等離子體原位輔助單晶硅納米劃痕試驗的材料變形和損傷機理

作者：

Ziheng Wang, Zhenjing Duan, Shuaishuai Wang, Yuheng Li, Jiyu Liu, Jinlong Song and Xin Liu

引用：

Wang, Z., Duan, Z., Wang, S. et al. Material Deformation and Damage Mechanism Based on In-Situ Plasma-Assisted Nanoscratch Test of Single Crystal Silicon. Chin. J. Mech. Eng. 38, 67 (2025). https://doi.org/10.1186/s10033-025-01238-2

Geometric Error Identification and Compensation of Swiveling Axes based on Additional Rotational Rigid Body Motion Constraints

基于附加旋轉剛體運動約束的回轉軸幾何誤差識別與補償

作者：

Jun Zha and Xiaofei Peng

引用：

Zha, J., Peng, X. Geometric Error Identification and Compensation of Swiveling Axes Based on Additional Rotational Rigid Body Motion Constraints. Chin. J. Mech. Eng. 38, 89 (2025). https://doi.org/10.1186/s10033-025-01221-x

Performance analysis and prediction of rock cutting with a rotating abrasive water jet

基于旋轉磨料水射流的巖石切割性能分析與預測

作者：

Hongxiang Jiang, Huihe Zhao, Xiaodi Zhang, Zijian Wu and Mingjin Zhao

引用：

Jiang, H., Zhao, H., Zhang, X. et al. Performance Analysis and Prediction of Rock Cutting with a Rotating Abrasive Water Jet. Chin. J. Mech. Eng. 38, 69 (2025). https://doi.org/10.1186/s10033-025-01250-6

An accurate modeling approach of contact stiffness in milling tool-holder interface using fractal theory

基于分形理論的銑刀-刀柄界面接觸剛度精確建模方法

作者：

Yawei Zheng, Zhengcai Zhao, Yang Zhou and Jiuhua Xu

引用：

Zheng, Y., Zhao, Z., Zhou, Y. et al. An Accurate Modeling Approach of Contact Stiffness in Milling Tool-holder Interface Using Fractal Theory. Chin. J. Mech. Eng. 38, 82 (2025). https://doi.org/10.1186/s10033-025-01236-4

Theoretical and experimental investigations on thickness uniformity in double-sided lapping

雙面研磨中工件間厚度均勻性的理論和實驗研究

作者：

Zhuolin Cai, Zhe Yang, Bo Pan, Jiale Lian, Lianlin Wang, Sergei Pronkevich and Jiang Guo

引用：

Cai, Z., Yang, Z., Pan, B. et al. Theoretical and Experimental Investigations on Thickness Uniformity in Double-sided Lapping. Chin. J. Mech. Eng. 38, 83 (2025). https://doi.org/10.1186/s10033-025-01234-6

Wear mechanism of cutting tools in multi-dimensional configuration cutterhead shield

多維構型刀盤盾構切削刀具磨損機理

作者：

Hua Jiang, Ao Zhang, Yusheng Jiang, Jiachen Zhu and Xiaoyan Zhang

引用：

Jiang, H., Zhang, A., Jiang, Y. et al. Wear Mechanism of Cutting Tools in Multi-dimensional Configuration Cutterhead Shield. Chin. J. Mech. Eng. 38, 80 (2025). https://doi.org/10.1186/s10033-025-01248-0

Research Progress of Abrasive Groups Ordered Grinding Wheels

磨料群有序排布砂輪的研究進展

作者：

Ye Guo, Bing Chen, Zihao Liu, Shiwei Sun, Guoyue Liu and Bing Guo

引用：

Guo, Y., Chen, B., Liu, Z. et al. Research Progress of Abrasive Groups Ordered Grinding Wheels. Chin. J. Mech. Eng. 38, 53 (2025). https://doi.org/10.1186/s10033-025-01214-w

Manufacturing Systems and Intelligence

Effects of different representations for solving integrated production and transportation scheduling problem

不同解表示方法對集成生產與運輸調度問題求解的影響

作者：

Youjie Yao, Qingzheng Wang, Cuiyu Wang and Xinyu Li

引用：

Yao, Y., Wang, Q., Wang, C. et al. Effects of Different Representations for Solving Integrated Production and Transportation Scheduling Problem. Chin. J. Mech. Eng. 38, 85 (2025). https://doi.org/10.1186/s10033-025-01247-1

Design, analysis and prototype testing of a non-explosive self-deploying wing actuated by NiTi shape memory alloy wires

基于NiTi形狀記憶合金絲驅動的非火工彈翼自展開機構的設計、分析與樣機測試

作者：

Bin Huang, Jun Wang, Xiaojun Gu, Jihong Zhu and Weihong Zhang

引用：

Huang, B., Wang, J., Gu, X. et al. Design, Analysis and Prototype Testing of a Non-explosive Self-deploying Wing Actuated by NiTi Shape Memory Alloy Wires. Chin. J. Mech. Eng. 38, 68 (2025). https://doi.org/10.1186/s10033-025-01230-w

Materials Processing Engineering

Experiments and Multiscale Simulation on Enhancement Mechanism of Zirconium Alloy Microstructure and Properties by Laser Shock Peening

激光沖擊強化鋯合金組織性能增強機制的實驗與多尺度模擬研究

作者：

Zhiyuan Liu, Feng Pan, Xueran Deng, Yujie Zhu, Fei Fan, Du Wang and Qiao Xu

引用：

Liu, Z., Pan, F., Deng, X. et al. Experiments and Multiscale Simulation on Enhancement Mechanism of Zirconium Alloy Microstructure and Properties by Laser Shock Peening. Chin. J. Mech. Eng. 38, 74 (2025). https://doi.org/10.1186/s10033-025-01246-2

Research on Material Flow Law and Control for Diffluence Upsetting-Extrusion Forming of Large-Scale Magnesium Alloy Complex Housing

大型鎂合金復雜殼體分流式鐓擠成形的材料流動規律與控制方法研究

作者：

Ang Wu, Zhimin Zhang, Yong Xue and Jian Xu

引用：

Wu, A., Zhang, Z., Xue, Y. et al. Research on Material Flow Law and Control for Diffluence Upsetting-Extrusion Forming of Large-Scale Magnesium Alloy Complex Housing. Chin. J. Mech. Eng. 38, 90 (2025). https://doi.org/10.1186/s10033-025-01244-4

Numerical Simulation Study on Residual Stress in Repair Welding of a CrMo Steel High-Temperature Pressure Pipeline Weldment Under Extended Service

長期服役CrMo鋼高溫壓力管道焊件補焊殘余應力的數值模擬研究

作者：

Bin Yang, Minghao Xiu, Wenchun Jiang and Wei Peng

引用：

Yang, B., Xiu, M., Jiang, W. et al. Numerical Simulation Study on Residual Stress in Repair Welding of a CrMo Steel High-Temperature Pressure Pipeline Weldment Under Extended Service. Chin. J. Mech. Eng. 38, 73 (2025). https://doi.org/10.1186/s10033-025-01240-8

Mechanical Tribology and Surface Technology

In-situ particulate-reinforced Al matrix composites: Effect of the synergistic mechanism of ZrB2 and Al3Zr on tribological behavioy

原位顆粒增強鋁基復合材料ZrB2和Al3Zr的協同機制對摩擦學行為的影響

作者：

Feng Wang, Hui Li, Xiaolong Zhang, Lei Jiao, Wei He, Xudong Han and Shcheretskyi Volodymyr

引用：

Wang, F., Li, H., Zhang, X. et al. In-situ Particulate-Reinforced Al Matrix Composites: Effect of the Synergistic Mechanism of ZrB2 and Al3Zr on Tribological Behavior. Chin. J. Mech. Eng. 38, 81 (2025). https://doi.org/10.1186/s10033-025-01243-5

Energy harvesting of flow induced vibration enhanced by bionic non-smooth surfaces

基于仿生非光滑表面的流致振動能量收集增強研究

作者：

Jiawei Wang, Bowen Tang, Hewei Yang, Guorui Zhu and Wei Tan

引用：

Wang, J., Tang, B., Yang, H. et al. Energy Harvesting of Flow Induced Vibration Enhanced by Bionic Non-Smooth Surfaces. Chin. J. Mech. Eng. 38, 79 (2025). https://doi.org/10.1186/s10033-025-01200-2

Study of Adhesion Force of Typical Space Solid Lubricant Films Based on AFM Technology

基于原子力顯微鏡技術的典型空間固體潤滑薄膜黏附力研究

作者：

Haoyu Wang, Shuying Chen, Qingwei Huang, Shaosong Li, Guozheng Ma, Haichao Zhao, Haidou Wang and Zhiying Ren

引用：

Wang, H., Chen, S., Huang, Q. et al. Study of Adhesion Force of Typical Space Solid Lubricant Films Based on AFM Technology. Chin. J. Mech. Eng. 38, 84 (2025). https://doi.org/10.1186/s10033-025-01251-5

Mechanism and Robotics

A Ground Mobile RPRPS Mechanism

一種地面移動式RPRPS機構

作者：

Xingjie Liu, Chao Liu, Ziqian Wang, Jingyun Lv and Yanan Yao

引用：

Liu, X., Liu, C., Wang, Z. et al. A Ground Mobile RPRPS Mechanism. Chin. J. Mech. Eng. 38, 86 (2025). https://doi.org/10.1186/s10033-025-01228-4

Inspired by the Adhesive Ability of Drosera and the Stress Envelope Effect Rescue Manipulator

基于茅膏菜黏附能力與應力包絡效應的救援機械手設計研究

作者：

Yanzhi Zhao, Haibo Yu, Changlei Pei, Maoshi Lu and Shijun Huang

引用：

Zhao, Y., Yu, H., Pei, C. et al. Inspired by the Adhesive Ability of Drosera and the Stress Envelope Effect Rescue Manipulator. Chin. J. Mech. Eng. 38, 94 (2025). https://doi.org/10.1186/s10033-025-01242-6

CGA-Based approach to forward kinematics of parallel mechanisms with the 3-RE structure

基于共形幾何代數的3-RE結構并聯機構正向運動學求解方法

作者：

Duanling Li, Yuankai Zhang, Ying Zhang, Zhonghai Zhang, Longjie Fan, Xiao Su and Shuaimin Gao

引用：

Li, D., Zhang, Y., Zhang, Y. et al. CGA-Based Approach to Forward Kinematics of Parallel Mechanisms with the 3-RE Structure. Chin. J. Mech. Eng. 38, 62 (2025). https://doi.org/10.1186/s10033-025-01223-9

New Energy and Intelligent

Connected Vehicles

FS-DRL: Fine-Grained Scheduling of Autonomous Vehicles at Non-Signalized Intersections via Dual Reinforced Learning

FS-DRT：基于雙重強化學習的無信號交叉口智能車輛精細化調度

作者：

Ning Sun, Weihao Wu, Guangbing Xiao and Guodong Yin

引用：

Sun, N., Wu, W., Xiao, G. et al. FS-DRL: Fine-Grained Scheduling of Autonomous Vehicles at Non-Signalized Intersections via Dual Reinforced Learning. Chin. J. Mech. Eng. 38, 71 (2025). https://doi.org/10.1186/s10033-025-01203-z

Multi-Objective Parallel Human-machine Steering Coordination Control Strategy of Intelligent Vehicles Path Tracking Based on Deep Reinforcement Learning

基于深度強化學習的智能汽車路徑跟蹤并聯式人機轉向多目標協同策略

作者：

Hongbo Wang, Lizhao Feng, Shaohua Li, Wuwei Chen and Juntao Zhou

引用：

Wang, H., Feng, L., Li, S. et al. Multi-Objective Parallel Human-machine Steering Coordination Control Strategy of Intelligent Vehicles Path Tracking Based on Deep Reinforcement Learning. Chin. J. Mech. Eng. 38, 63 (2025). https://doi.org/10.1186/s10033-025-01207-9

Performance Analysis and Multi-Objective Optimization of Functional Gradient Honeycomb Non-pneumatic Tires

功能梯度蜂窩非充氣輪胎的性能分析及多目標優化

作者：

Haichao Zhou, Haifeng Zhou, Haoze Ren, Zhou Zheng and Guolin Wang

引用：

Zhou, H., Zhou, H., Ren, H. et al. Performance Analysis and Multi-Objective Optimization of Functional Gradient Honeycomb Non-pneumatic Tires. Chin. J. Mech. Eng. 38, 78 (2025). https://doi.org/10.1186/s10033-025-01235-5

Rail Transit Vehicle Systems

Revolutionizing rail transportation: Unleashing titanium alloys for enhanced performance, safety, and sustainability

革新軌道交通：鈦合金在提升性能、安全性與可持續性方面的突破性應用

作者：

Zhe Zhang, Bing Yang and Shoune Xiao

引用：

Zhang, Z., Yang, B. & Xiao, S. Revolutionizing Rail Transportation: Unleashing Titanium Alloys for Enhanced Performance, Safety, and Sustainability. Chin. J. Mech. Eng. 38, 72 (2025). https://doi.org/10.1186/s10033-025-01229-3

Multi-Objective Optimization Approach for Achieving Target Profile in Rail Grinding of Worn Rails

磨耗鋼軌打磨目標廓形的多目標優化方法

作者：

Zhiwei Wu, Wengang Fan, Jiang Li, Zhiao Liu and Jiating Yang

引用：

Wu, Z., Fan, W., Li, J. et al. Multi-Objective Optimization Approach for Achieving Target Profile in Rail Grinding of Worn Rails. Chin. J. Mech. Eng. 38, 60 (2025). https://doi.org/10.1186/s10033-025-01208-8

Transmission and Drive

Performance Analysis of Open–Closed Circuit Integrated Pump-Valve Collaborative Drive Multi-Actuator System

開閉式回路集成泵閥協同驅動多執行器系統的性能分析

作者：

Tao Liang, Long Quan, Lei Ge and Lianpeng Xia

引用：

Liang, T., Quan, L., Ge, L. et al. Performance Analysis of Open–Closed Circuit Integrated Pump-Valve Collaborative Drive Multi-Actuator System. Chin. J. Mech. Eng. 38, 104 (2025). https://doi.org/10.1186/s10033-025-01277-9

Investigation of a Low-Power-Consumption and Self-Retaining Micro Solenoid Valve for Thermal Management Systems

面向熱管理系統的低功耗自保持微型電磁閥研究

作者：

Jing Yao, Shuai Yang, Liu Yang, Qingxin Meng, Chao Ai and Xiangdong Kong

引用：

Yao, J., Yang, S., Yang, L. et al. Investigation of a Low-Power-Consumption and Self-Retaining Micro Solenoid Valve for Thermal Management Systems. Chin. J. Mech. Eng. 38, 59 (2025). https://doi.org/10.1186/s10033-025-01227-5

Design and Performance Study of an Automatic Compensation Wear High-Pressure Rotary Sealing Device

自動補償磨損式高壓旋轉密封裝置的設計與性能研究

作者：

Hongxiang Jiang, Huihe Zhao, Xiaodi Zhang, Hongsheng Li and Chao Xia

引用：

Jiang, H., Zhao, H., Zhang, X. et al. Design and Performance Study of an Automatic Compensation Wear High-Pressure Rotary Sealing Device. Chin. J. Mech. Eng. 38, 77 (2025). https://doi.org/10.1186/s10033-025-01249-z

Numerical Simulation and Improvement of Fiber Thrower Using Multi-Domain Coupling Schemes

基于多域耦合方案的纖維拋灑裝置數值模擬與改進研究

作者：

Xu Qian, Su Yang and Chunbao Liu

引用：

Qian, X., Yang, S. & Liu, C. Numerical Simulation and Improvement of Fiber Thrower Using Multi-Domain Coupling Schemes. Chin. J. Mech. Eng. 38, 50 (2025). https://doi.org/10.1186/s10033-025-01213-x

Analysis of Leakage Effects on the Outlet Flow Characteristics of a Two-dimensional Piston Pump

二維活塞泵泄漏效應對出口流量特性的影響分析

作者：

Yu Huang, Hanyu Xu, Wei Shao, Chuan Ding and Li Liu

引用：

Huang, Y., Xu, H., Shao, W. et al. Analysis of Leakage Effects on Outlet Flow Characteristics of a Two-dimensional Piston Pump. Chin. J. Mech. Eng. 38, 92 (2025). https://doi.org/10.1186/s10033-025-01265-z

Investigation on a novel tractive-magnetic-coupling and its application on 2D electro-hydraulic proportional flow valve

新型吸力型磁懸浮聯軸及其在二維電液比例流量閥上的應用研究

作者：

Hao Xu, Bin Meng, Guanzheng Yang, Sheng Li and Jian Ruan

引用：

Xu, H., Meng, B., Yang, G. et al. Investigation on a Novel Tractive-Magnetic-Coupling and its Application on 2D Electro-Hydraulic Proportional Flow Valve. Chin. J. Mech. Eng. 38, 109 (2025). https://doi.org/10.1186/s10033-025-01226-6

責任編輯：惲海艷

責任校對：向映姣

審 核：張 彤

JME學院簡介

JME學院是由《機械工程學報》編輯部2018年創建，以關注、陪伴青年學者成長為宗旨，努力探索學術傳播服務新模式。

歡迎各位老師掃碼添加小助理-暖暖為好友，由小助理拉入JME學院官方群！

歡迎關注JME學院視頻號~

尋覓合作伙伴

有一種合作叫做真誠，有一種發展可以無限，有一種伙伴可以互利共贏，愿我們合作起來流連忘返，發展起來前景可觀。關于論文推薦、團隊介紹、圖書出版、學術直播、招聘信息、會議推廣等，請與我們聯系。

感謝關注我們！我們《機械工程學報》編輯部將努力為您打造一個有態度、有深度、有溫度的學術媒體！

版權聲明：

本文為《機械工程學報》編輯部原創內容，歡迎轉載，請聯系授權！

在公眾號后臺留言需要轉載的文章題目及要轉載的公眾號ID以獲取授權!

微信投稿、轉載等：

聯系人：暖暖

電話：010-88379909

E-mail：jme@cmes.org

網 址：http://www.cjmenet.com.cn

官方微信號：jmewechat